Tractor · Massey Ferguson

Massey Ferguson 6S Tractor ECU Software Solutions

Name: Massey Ferguson 6S Tractor ECU Software Solutions
Brand: Massey Ferguson

The Massey Ferguson 6S is Massey Ferguson's tractor. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.

Get a Quote Service points On-site service

Massey Ferguson 6S technical data

Each row states where the data comes from. “Manufacturer data” is the factory figure published by the manufacturer; figures after a remap are shown only where we have our own measurements and records. Estimated figures are not guaranteed results.

Engine	Power	Torque	ECU	Read / write	Verification
MF 6S.135 AGCO Power 4,9 L · Stage V	135 bhp	650 Nm	—	—	Manufacturer data (factory figure)
MF 6S.145 AGCO Power 4,9 L · Stage V	145 bhp	700 Nm	—	—	Manufacturer data (factory figure)
MF 6S.155 AGCO Power 4,9 L · Stage V	155 bhp	750 Nm	—	—	Manufacturer data (factory figure)
MF 6S.165 AGCO Power 4,9 L · Stage V	165 bhp	800 Nm	—	—	Manufacturer data (factory figure)
MF 6S.180 AGCO Power 4,9 L · Stage V	180 bhp	840 Nm	—	—	Manufacturer data (factory figure)

ECU and compatibility for the Massey Ferguson 6S

Services with a verified solution for Massey Ferguson in our library: Stage 1 Remap, DPF Delete, EGR Delete, AdBlue / SCR Delete and DTC / Fault Code Removal. The control units we work on in Massey Ferguson machines include BOSCH EDC17CV41, BOSCH EDC17CV44, BOSCH MD1CS069 and BOSCH EDC17CV54. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Massey Ferguson 6S from a photo of the ECU label or from the file read out.

Services available for Massey Ferguson (tractor)

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

ECU models used in Massey Ferguson tractors

BOSCH EDC17CV41 BOSCH EDC17CV44 BOSCH MD1CS069 BOSCH EDC17CV54 BOSCH EDC17C49 BOSCH EDC17CP55 BOSCH EDC16

Frequently asked questions

Which software services are available for the Massey Ferguson 6S?

Services with a verified solution for Massey Ferguson in our library: Stage 1 Remap, DPF Delete, EGR Delete, AdBlue / SCR Delete and DTC / Fault Code Removal. We confirm on the file which of them apply to the ECU fitted to your Massey Ferguson 6S.

How do I find out which ECU my Massey Ferguson 6S has?

The exact type is read from the label on the ECU or with a diagnostic tool. A photo of the label and the model year of the machine are enough.

How long does the job take, and can it be done on site?

Most ECUs are read and written through the diagnostic socket and the job is completed the same day; some units are removed and worked on the bench. Contact us for on-site service.

Can the original software be restored?

Yes. The original software is archived and the Massey Ferguson 6S can be returned to its factory setting on request.

Why does the machine cut power when there is an AdBlue fault?

When the emission system detects a fault, the ECU first gives a warning; if the fault is not fixed it limits torque and engine speed in stages, and at the final stage the machine runs at idle only. This is how the system is designed to behave. Power returns once the cause is fixed or a software solution matching the ECU type is applied.

Why does DPF regeneration not complete in the field or on site?

Regeneration needs the exhaust temperature to stay high for a while; low load, idling and short work cycles do not provide that. Faults in the differential pressure sensor, the EGR or the injectors also stop regeneration. The soot load and sensor values are read first; depending on the cause we recommend a forced regeneration, cleaning or a software solution.

Does the EGR job give the machine more power?

The EGR job is not a power remap; no power gain should be expected from it alone. Because the loss of pull and the power reduction caused by a faulty EGR disappear, the machine returns to its factory output. If more power is wanted, a power remap is applied separately.

Other Massey Ferguson models

Massey Ferguson 5S Massey Ferguson · Tractor → Tractor →

Quick file quote

Tell us the machine — we reply on WhatsApp

Send the machine and ECU details in under a minute. Our Istanbul team checks the file options and replies with the next step.

Original read checked before work
Checksum corrected
Support after delivery

Order on ECU Prime →