English ENTürkçe TRDeutsch DEFrançais FR
Get a Quote
Tractor · Massey Ferguson

Massey Ferguson Tractor Remapping and ECU Tuning

We remap the ECU of Massey Ferguson tractors and agricultural machines to improve power, torque and fuel efficiency.

Get a Quote Service points On-site service
ECU software work on New Holland and Case IH tractors and an Iveco truck in the workshop

On Massey Ferguson models the engine control unit is recalibrated from the tractor's own original file. Services with verified solutions for Massey Ferguson in our library: Stage 1 Remap, AdBlue / SCR Delete and DTC / Fault Code Removal.

The ECU models we work on in Massey Ferguson tractors include BOSCH EDC17CV41, BOSCH EDC17CV44, BOSCH MD1CS069 and BOSCH EDC17CV54. The ECU type varies with model year and engine; send us a photo of the ECU label or the vehicle details and we will confirm exactly which services are possible.

The result depends on the engine and on the power rating of the tractor within its series. The calibration respects cooling, transmission and PTO limits, and the original software is archived.

Services available for Massey Ferguson tractors

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Massey Ferguson models

Massey Ferguson 5SMassey Ferguson 6S

For models not listed, send us a photo of the ECU label and we will confirm compatibility on the file.

ECU models used in Massey Ferguson tractors

BOSCH EDC17CV41BOSCH EDC17CV44BOSCH MD1CS069BOSCH EDC17CV54BOSCH EDC17C49BOSCH EDC17CP55BOSCH EDC16

Frequently asked questions

Which software services are available for Massey Ferguson tractors?
Services with verified solutions for Massey Ferguson in our library: Stage 1 Remap, AdBlue / SCR Delete and DTC / Fault Code Removal. We confirm which of them apply to your tractor from the file, according to its ECU type.
How do I find out which ECU my Massey Ferguson tractor has?
Massey Ferguson models use control units such as BOSCH EDC17CV41, BOSCH EDC17CV44, BOSCH MD1CS069 and BOSCH EDC17CV54. The exact type is read from the label on the ECU or with a diagnostic tool; a photo of the label is enough.
Can I return to the original software afterwards?
Yes. Your original software is archived and your Massey Ferguson tractor can be returned to factory settings whenever you wish.
How long does the job take?
Most ECUs are read and written through the diagnostic socket and the job is finished the same day; some units are removed and processed on the bench.
Will a reset clear the AdBlue warning?
After the tank is refilled, the warning goes out by itself on most machines. If it stays on after topping up, the cause is usually the NOx sensor, pump, heater or level sensor; a reset alone does not last, and the warning and power reduction return. The fault memory is read first and the source identified.
The machine keeps asking for a parked regeneration. What does that mean?
It means the soot load in the filter is rising faster than normal. The reason is usually the way the machine is used (long idling, low load) or a fault in the injectors, EGR or differential pressure sensor. Rather than starting regeneration again and again, the cause needs to be diagnosed.
The machine is losing coolant. Could it be related to the EGR?
It could. When the EGR cooler leaks internally, coolant passes to the exhaust side; coolant drops without any visible leak and white smoke may come from the exhaust. This is a mechanical fault and software does not fix it; the cooler is repaired or replaced. The software solution is for EGR faults caused by the valve and sensors.

Other tractor brands

New HollandCase IHJohn DeereAgrifacCarraroDeutz-FahrFendtKubotaAmazoneErkuntClaasSAMEValtraArbosChallengerLandini Tractor →
Quick file quote

Tell us the machine — we reply on WhatsApp

Send the machine and ECU details in under a minute. Our Istanbul team checks the file options and replies with the next step.

  • Original read checked before work
  • Checksum corrected
  • Support after delivery

Order on ECU Prime →

Opens WhatsApp with your details filled in. Workshops can also order directly on ECU Prime.

Need a file for a tractor or machine?

Send the machine and ECU details on WhatsApp, or order directly on ECU Prime with your master or slave account.

Get a Quote Service points