Diagnostic & ECU devices
OEM and aftermarket diagnostic tools and ECU programming devices, with set-up and support.
Image source: manufacturer · Dimsport ↗
Manufacturer promotional media. Vehicle coverage and tool licensing are checked separately before a quotation.
The Genius
Dimsport The Genius is a stand-alone ECU programming device that works without a PC or an internet connection. It combines the capabilities of the manufacturer's New Genius and New Trasdata tools in one unit.
Highlights
- OBD, BENCH and OPEN modes in one device
- 10.1-inch touchscreen; guided vehicle selection or direct protocol access
- Wi-Fi and Bluetooth; built-in battery for use without external power
- Support tickets, remote assistance and video tutorials on the device
Who is it for? Workshops that want one device for work both on the vehicle and on the bench.
Dimsport The Genius is a registered trademark of Holdim SpA. Product names are used for identification only.
Image source: manufacturer · Magicmotorsport ↗
Video could not load. Use the manufacturer link to watch it.
Open video on manufacturer website ↗Manufacturer promotional media. Vehicle coverage and tool licensing are checked separately before a quotation.
FLEX
Magicmotorsport FLEX is an all-in-one tool for programming engine (ECU) and transmission (TCU) control units. It works with a continuously updated vehicle list covering cars, motorcycles, trucks and other vehicles.
Highlights
- OBD, Bench and Boot modes
- Same hardware for Master and Slave; the software licence sets the features
- A Master licence can link up to 99 Slave users
- Access to locked latest-generation units with the Korhex add-on
Who is it for? Professionals working on current-generation ECUs and gearbox units who want to build a dealer network.
Magicmotorsport FLEX is a registered trademark of Magic Engineering S.r.l.. Product names are used for identification only.
Korhex
Korhex is a hardware add-on for Magicmotorsport FLEX; it does not work on its own, and FLEX manages the procedure. It reaches the processor through a single contact point, with no board flipping, resistor desoldering or manual Boot pin wiring.
Highlights
- Boot Glitch working mode (electromagnetic fault injection, EMFI)
- Read / write internal flash and EEPROM, full backup, Boot unlock
- Example units: Bosch MD1CS003, MG1CS032, MD1CP001; Mercedes CPC5; DAF Delphi ETC3
- Positioned with a dedicated mask per unit; compatibility is in the FLEX vehicle list
Who is it for? Workshops that use FLEX and work on locked latest-generation units.
Magicmotorsport Korhex is a registered trademark of Magic Engineering S.r.l.. Product names are used for identification only.
Image source: manufacturer · AutoTuner ↗
Manufacturer promotional media. Vehicle coverage and tool licensing are checked separately before a quotation.
AutoTuner
AutoTuner is a tool for professionals for reprogramming engine (ECU) and transmission (TCU) control units. The manufacturer states that there is no subscription fee and that updates are free.
Highlights
- OBD, Bench and Boot methods
- Covers cars, trucks, tractors, motorcycles, ATVs, boats and jet skis
- No subscription fee; free updates
- Vehicle-specific bench cables (e.g. BMW MDG1, DSG DQ38x)
Who is it for? Workshops that want a wide vehicle range without paying a subscription.
AutoTuner is a trademark of its owner. Product names are used for identification only.
Galletto (FG Technology EOBD2)
FG Technology EOBD2, known in the trade as Galletto, is a programming tool that reads and writes ECUs through the diagnostic socket and on the bench. The manufacturer also offers the Bench Ultra hardware, which works through pin connections without opening the unit.
Highlights
- Read / write through the diagnostic socket (OBD) and on the bench
- Covers cars, motorcycles, trucks, agricultural machinery and boats
- Pin connection without opening the unit with Bench Ultra
- Regular OBD, JTAG and BenchMode protocol updates
Who is it for? Workshops that want one tool for both OBD and bench work.
Galletto (FG Technology EOBD2) is a trademark of its owner. Product names are used for identification only.
Work with AgriRemap as a master or slave dealer
Open a master or slave account on the ECU Prime platform for tractor and machinery files, with training and device support.