Valtra T Series (5th gen) ECU remap file
File service for the Valtra T Series (5th gen) (T155 – T255) with the AGCO Power 7.4 L, 6-cylinder engine and Bosch EDC17CV56 / Bosch EDC17CV44 ECU. Upload the original read, pick the solution and pay online — the modified file is emailed to you in 5–45 minutes.
Outside working hours — your file will be delivered first thing next working morning
Order your file — from €149
The Valtra T Series (5th gen) covers roughly 155–271 hp of factory-rated power across the range and is built from 2021+. It runs the AGCO Power 7.4 L, 6-cylinder engine; in our catalogue these tractors are equipped with the Bosch EDC17CV56 / Bosch EDC17CV44 control unit. The exact ECU and software version are confirmed from the read you upload, before any work starts.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a heavy tractor that usually means a stronger pull at low engine speed and less down-shifting under load. We quote the real gain only after seeing your read, because it depends on the software version and on how the tractor is used.
Every file is built by hand on the original software of your ECU, the checksum is corrected, and the file is tested before it leaves us. If something does not suit the tractor after writing, send us a note and we revise it free of charge.
Models in the Valtra T Series (5th gen) series
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
Technical data
| Models | T155 – T255 |
|---|---|
| Rated power (approx.) | 155–271 hp |
| Engine | AGCO Power 7.4 L, 6-cylinder |
| Typical ECU | Bosch EDC17CV56 / Bosch EDC17CV44 |
| Model years | 2021+ |
| Delivery | 5–45 min |
The ECU can differ by serial number and market; it is confirmed from your read.
Bosch EDC17CV56 bricked or lost the original file? Recovery & stock →
Bosch EDC17CV44 bricked or lost the original file? Recovery & stock →
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€149
- AdBlue / SCR solution€119
- DPF solution€99
- EGR solution€59
- Bricked ECU recovery file€99
- Original file from archive€59
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsApp