John Deere 6090M ECU remap file
Online file service for the John Deere 6090M from the John Deere 6M Series series, with the John Deere PowerTech PVS / PSS 4.5 L & 6.8 L engine and John Deere Phoenix L33 / John Deere Phoenix L32 ECU. Upload the original read, choose the solution and pay online — the modified file reaches your email in 5–45 minutes.
Outside working hours — your file will be delivered first thing next working morning
Order your file — from €149
The John Deere 6090M belongs to the John Deere 6M Series range (6090M – 6195M). Files for the John Deere 6090M are built on the software read from your own tractor, so the engine rating and software version of your John Deere 6090M are taken into account. Real gains are quoted after we see your read.
The John Deere 6M Series covers roughly 90–195 hp of factory-rated power across the range and is built from 2023+. It runs the John Deere PowerTech PVS / PSS 4.5 L & 6.8 L engine; in our catalogue these tractors are equipped with the John Deere Phoenix L33 / John Deere Phoenix L32 control unit. The exact ECU and software version are confirmed from the read you upload, before any work starts.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a heavy tractor that usually means a stronger pull at low engine speed and less down-shifting under load. We quote the real gain only after seeing your read, because it depends on the software version and on how the tractor is used.
Every file is built by hand on the original software of your ECU, the checksum is corrected, and the file is tested before it leaves us. If something does not suit the tractor after writing, send us a note and we revise it free of charge.
Models in the John Deere 6M Series series
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
Technical data
| Model | 6090M |
|---|---|
| Models | 6090M – 6195M |
| Rated power (approx.) | 90–195 hp |
| Engine | John Deere PowerTech PVS / PSS 4.5 L & 6.8 L |
| Typical ECU | John Deere Phoenix L33 / John Deere Phoenix L32 |
| Model years | 2023+ |
| Delivery | 5–45 min |
The ECU can differ by serial number and market; it is confirmed from your read.
John Deere Phoenix L33 bricked or lost the original file? Recovery & stock →
John Deere Phoenix L32 bricked or lost the original file? Recovery & stock →
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€149
- AdBlue / SCR solution€119
- Bricked ECU recovery file€99
- Original file from archive€59
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsAppOther John Deere models
John Deere · 2021+
6R Series
6R 110 – 6R 250 · 110–250 hp
John Deere Phoenix L33 / John Deere Phoenix L32
from €149Choose options →
John Deere · 2020+
7R Series
7R 230 – 7R 350 · 230–350 hp
John Deere Phoenix L33 / John Deere Phoenix L32
from €189Choose options →
John Deere · 2020+
8R Series
8R 230 – 8R 410 · 230–410 hp
John Deere Phoenix L33 / John Deere Phoenix L32
from €189Choose options →
John Deere tractor ECU files → Tractor ECU files for the latest-generation tractors →