Fendt 311 Vario ECU remap file
Online file service for the Fendt 311 Vario from the Fendt 300 Vario Gen4 series, with the AGCO Power 3.3 L, 3-cylinder engine and Bosch EDC17CV56 ECU. Upload the original read, choose the solution and pay online — the modified file reaches your email in 5–45 minutes.
Outside working hours — your file will be delivered first thing next working morning
Order your file — from €119
The Fendt 311 Vario belongs to the Fendt 300 Vario Gen4 range (311 – 314 Vario). Files for the Fendt 311 Vario are built on the software read from your own tractor, so the engine rating and software version of your Fendt 311 Vario are taken into account. Real gains are quoted after we see your read.
The Fendt 300 Vario Gen4 covers roughly 113–142 hp of factory-rated power across the range and is built from 2020+. It runs the AGCO Power 3.3 L, 3-cylinder engine; in our catalogue these tractors are equipped with the Bosch EDC17CV56 control unit. The exact ECU and software version are confirmed from the read you upload, before any work starts.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a heavy tractor that usually means a stronger pull at low engine speed and less down-shifting under load. We quote the real gain only after seeing your read, because it depends on the software version and on how the tractor is used.
Every file is built by hand on the original software of your ECU, the checksum is corrected, and the file is tested before it leaves us. If something does not suit the tractor after writing, send us a note and we revise it free of charge.
Models in the Fendt 300 Vario Gen4 series
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
Technical data
| Model | 311 Vario |
|---|---|
| Models | 311 – 314 Vario |
| Rated power (approx.) | 113–142 hp |
| Engine | AGCO Power 3.3 L, 3-cylinder |
| Typical ECU | Bosch EDC17CV56 |
| Model years | 2020+ |
| Delivery | 5–45 min |
The ECU can differ by serial number and market; it is confirmed from your read.
Bosch EDC17CV56 bricked or lost the original file? Recovery & stock →
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€119
- AdBlue / SCR solution€99
- DPF solution€79
- EGR solution€49
- Bricked ECU recovery file€89
- Original file from archive€49
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsAppOther Fendt models
Fendt · 2018+
500 Vario
512 – 516 Vario · 125–165 hp
Bosch EDC17CV52
from €149Choose options →
Fendt · 2023+
600 Vario
600 Vario series · 149–224 hp
Bosch EDC17CV56
from €149Choose options →
Fendt · 2020+
700 Vario Gen6
720 – 728 Vario · 203–283 hp
Bosch EDC17CV56
from €149Choose options →
Fendt tractor ECU files → Tractor ECU files for the latest-generation tractors →