Deutz-Fahr 6 Series TTV ECU remap file
File service for the Deutz-Fahr 6 Series TTV (6150.4 – 6190 TTV) with the Deutz TCD 4.1 L & 6.1 L engine and Bosch MD1CC878C / Bosch EDC17CV52 ECU. Upload the original read, pick the solution and pay online — the modified file is emailed to you in 5–45 minutes.
Engineers online now — typical delivery 5–45 minutes
Order your file — from €149
The Deutz-Fahr 6 Series TTV covers roughly 156–226 hp of factory-rated power across the range and is built from 2020+. It runs the Deutz TCD 4.1 L & 6.1 L engine; in our catalogue these tractors are equipped with the Bosch MD1CC878C / Bosch EDC17CV52 control unit. The exact ECU and software version are confirmed from the read you upload, before any work starts.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a heavy tractor that usually means a stronger pull at low engine speed and less down-shifting under load. We quote the real gain only after seeing your read, because it depends on the software version and on how the tractor is used.
Every file is built by hand on the original software of your ECU, the checksum is corrected, and the file is tested before it leaves us. If something does not suit the tractor after writing, send us a note and we revise it free of charge.
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
Technical data
| Models | 6150.4 – 6190 TTV |
|---|---|
| Rated power (approx.) | 156–226 hp |
| Engine | Deutz TCD 4.1 L & 6.1 L |
| Typical ECU | Bosch MD1CC878C / Bosch EDC17CV52 |
| Model years | 2020+ |
| Delivery | 5–45 min |
The ECU can differ by serial number and market; it is confirmed from your read.
Bosch MD1CC878C bricked or lost the original file? Recovery & stock →
Bosch EDC17CV52 bricked or lost the original file? Recovery & stock →
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€149
- AdBlue / SCR solution€119
- DPF solution€99
- EGR solution€59
- DTC (fault code) off€29
- Bricked ECU recovery file€99
- Original file from archive€59
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsAppOther Deutz-Fahr models
Deutz-Fahr · 2020+
7250 TTV
7250 TTV · 247–263 hp
Bosch MD1CC878C / Bosch EDC17CV52
from €149Choose options →
Deutz-Fahr · 2020+
8280 TTV
8280 TTV · 287 hp
Bosch MD1CC878C / Bosch EDC17CV52
from €149Choose options →
Deutz-Fahr · 2020+
9 Series TTV
9290 – 9340 TTV · 295–336 hp
Bosch MD1CC878C / Bosch EDC17CV52
from €189Choose options →
Deutz-Fahr tractor ECU files → Tractor ECU files for the latest-generation tractors →