Case IH Steiger 420 ECU remap file
Online file service for the Case IH Steiger 420 from the Case IH Steiger / Quadtrac series, with the FPT Cursor 13 & Cursor 16 engine and Bosch MD1CE101 ECU. Upload the original read, choose the solution and pay online — the modified file reaches your email in 5–45 minutes.
Engineers online now — typical delivery 5–45 minutes
Order your file — from €189
The Case IH Steiger 420 belongs to the Case IH Steiger / Quadtrac range (Steiger 420 – 715). Files for the Case IH Steiger 420 are built on the software read from your own tractor, so the engine rating and software version of your Case IH Steiger 420 are taken into account. Real gains are quoted after we see your read.
The Case IH Steiger / Quadtrac covers roughly 420–715 hp of factory-rated power across the range and is built from 2021+. It runs the FPT Cursor 13 & Cursor 16 engine; in our catalogue these tractors are equipped with the Bosch MD1CE101 control unit. The exact ECU and software version are confirmed from the read you upload, before any work starts.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a heavy tractor that usually means a stronger pull at low engine speed and less down-shifting under load. We quote the real gain only after seeing your read, because it depends on the software version and on how the tractor is used.
Every file is built by hand on the original software of your ECU, the checksum is corrected, and the file is tested before it leaves us. If something does not suit the tractor after writing, send us a note and we revise it free of charge.
Models in the Case IH Steiger / Quadtrac series
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
Technical data
| Model | Steiger 420 |
|---|---|
| Models | Steiger 420 – 715 |
| Rated power (approx.) | 420–715 hp |
| Engine | FPT Cursor 13 & Cursor 16 |
| Typical ECU | Bosch MD1CE101 |
| Model years | 2021+ |
| Delivery | 5–45 min |
The ECU can differ by serial number and market; it is confirmed from your read.
Bosch MD1CE101 bricked or lost the original file? Recovery & stock →
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€189
- AdBlue / SCR solution€149
- DPF solution€119
- EGR solution€69
- Bricked ECU recovery file€119
- Original file from archive€69
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsAppOther Case IH models
Case IH · 2021+
Maxxum
Maxxum 115 – 150 · 116–145 hp
Bosch MD1CS069
from €119Choose options →
Case IH · 2021+
Puma / Puma CVXDrive
Puma 150 – 260 · 150–260 hp
Bosch MD1CS069
from €149Choose options →
Case IH · 2021+
Optum CVXDrive
Optum 250 – 340 · 250–340 hp
Bosch MD1CS069
from €189Choose options →
Case IH · 2020+
Magnum AFS Connect
Magnum 250 – 400 · 250–400 hp
Bosch MD1CE101
from €189Choose options →
Case IH tractor ECU files → Tractor ECU files for the latest-generation tractors →