English ENTürkçe TRDeutsch DEFrançais FR
Get a Quote
Construction Machine · Hidromek

Hidromek HMK 210 LC Excavator ECU Software Solutions

The Hidromek HMK 210 LC is Hidromek's excavator. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.

Get a Quote Service points On-site service

Hidromek HMK 210 LC technical data

Each row states where the data comes from. “Manufacturer data” is the factory figure published by the manufacturer; figures after a remap are shown only where we have our own measurements and records. Estimated figures are not guaranteed results.

EnginePowerTorqueECURead / writeVerification
HMK 210 LC Isuzu 4HK1X
5,2 L · Stage V		 172 bhp 670 Nm — — Manufacturer data (factory figure)

ECU and compatibility for the Hidromek HMK 210 LC

Services with a verified solution for Hidromek in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Hidromek HMK 210 LC from a photo of the ECU label or from the file read out.

Services available for Hidromek (excavator)

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

Frequently asked questions

Which software services are available for the Hidromek HMK 210 LC?
Services with a verified solution for Hidromek in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. We confirm on the file which of them apply to the ECU fitted to your Hidromek HMK 210 LC.
How do I find out which ECU my Hidromek HMK 210 LC has?
The exact type is read from the label on the ECU or with a diagnostic tool. A photo of the label and the model year of the machine are enough.
How long does the job take, and can it be done on site?
Most ECUs are read and written through the diagnostic socket and the job is completed the same day; some units are removed and worked on the bench. Contact us for on-site service.
Can the original software be restored?
Yes. The original software is archived and the Hidromek HMK 210 LC can be returned to its factory setting on request.
Why does the machine cut power when there is an AdBlue fault?
When the emission system detects a fault, the ECU first gives a warning; if the fault is not fixed it limits torque and engine speed in stages, and at the final stage the machine runs at idle only. This is how the system is designed to behave. Power returns once the cause is fixed or a software solution matching the ECU type is applied.
Why does DPF regeneration not complete in the field or on site?
Regeneration needs the exhaust temperature to stay high for a while; low load, idling and short work cycles do not provide that. Faults in the differential pressure sensor, the EGR or the injectors also stop regeneration. The soot load and sensor values are read first; depending on the cause we recommend a forced regeneration, cleaning or a software solution.
Does the EGR job give the machine more power?
The EGR job is not a power remap; no power gain should be expected from it alone. Because the loss of pull and the power reduction caused by a faulty EGR disappear, the machine returns to its factory output. If more power is wanted, a power remap is applied separately.

Other Hidromek models

Hidromek HMK 102BHidromek HMK 230LCHidromek HMK 310 LCHidromek HMK 640WL Hidromek · Construction Machine → Construction Machine →
Quick file quote

Tell us the machine — we reply on WhatsApp

Send the machine and ECU details in under a minute. Our Istanbul team checks the file options and replies with the next step.

  • Original read checked before work
  • Checksum corrected
  • Support after delivery

Order on ECU Prime →

Opens WhatsApp with your details filled in. Workshops can also order directly on ECU Prime.

Need a file for a tractor or machine?

Send the machine and ECU details on WhatsApp, or order directly on ECU Prime with your master or slave account.

Get a Quote Service points