Volvo Penta Marine EDC7C1-C2 ECU remap file
Online file service for Volvo Penta Marine with the Bosch EDC7C1-C2 ECU. Upload the original read, tick the solutions and pay online — the modified file reaches your email in 5–45 minutes.
Engineers online now — typical delivery 5–45 minutes
The Bosch EDC7C1-C2 is a Bosch engine control unit used on Volvo Penta Marine machines and engines, typically with Volvo Penta D3, D4, D6, D11, D13 engines. It is built around an Freescale MPC5xx processor. It is usually read via OBD / bench, depending on your tool and the software version. Before any work starts we identify the hardware and software numbers from the read you upload.
A Stage 1 file reworks the fuel quantity, rail pressure, boost and torque limiter maps of the original software. On a working machine that usually means the engine holds its speed better under hydraulic load and recovers faster after a heavy cycle. We quote the real gain only after we see your read.
Every file is built by hand on the original software of your ECU — no generic map. The checksum is corrected and the file is checked before it leaves us. If something does not suit the engine after writing, send us a note and we revise it free of charge.
- Hand-made file on the original software, no generic map
- Checksum corrected, ready to write
- Full refund if the file cannot be made from your read
- Free revision and support after delivery
File details
| Brand | Volvo Penta Marine |
|---|---|
| ECU | Bosch EDC7C1-C2 |
| ECU maker | Bosch |
| Typical read | OBD / bench |
| Processor | Freescale MPC5xx |
| Engine | Volvo Penta D3, D4, D6, D11, D13 |
| Solutions | Stage 1 |
| Delivery | 5–45 min |
The exact hardware and software version is confirmed from your read before any work starts.
Order your file
Tick the solutions, upload the original read and pay. You will receive an email confirmation right away.
- Read the ECU — Read the original file with your tool (KESS3, Autotuner, Flex, CMDFlash, bFlash, PCMflash…) by OBD, bench or boot.
- Upload and choose — Open your model, tick Stage 1, AdBlue, DPF, EGR or DTC and upload the original read.
- Pay securely — Pay with your PayPal account or any debit / credit card through PayPal. No account needed on our side.
- Receive the file — The tuned, checksum-corrected file reaches your email in 5–45 minutes during working hours.
Working hours: Monday–Saturday, 08:00–22:00 (Istanbul, GMT+3). Orders placed outside these hours are delivered first thing the next working morning.
Order this file on WhatsApp
- Stage 1 performance€189
- Bricked ECU recovery file€119
- Original file from archive€69
Online payment for this page is being activated. Send us the model and your read on WhatsApp and we will send a PayPal payment link.
Order on WhatsAppEmission solutions and the law
AdBlue / SCR, DPF and EGR solutions are supplied only for off-road use, export, competition or testing where local law permits it. On public roads in the EU and many other countries, removing or disabling emission systems is not allowed. The buyer is responsible for complying with the rules in their country.